- Home
- Honda Z50 69-71 Controls
Honda Z50 69-71 Controls
Honda Z50 69-71 Control parts at Canada's largest supplier of Vintage Honda Z50, CT70, ATC70 and Honda CRF50 /70s. Sales, Service, and Restorations. PhatMX
$6.50
OEM Honda Kickstart Rubber and Shifter Rubber - Time to replace your warn out Rubbers.
Fits al...
From
$7.95
OEM Honda Brake Part Kits. Fits Honda Z50 71-99, CT70 K0-76.
Kit includes: 1 Spring, 1 Barrel, ...
From
$3.95
Chrome reproduction Lever bolt or Black OEM Honda Bolt.
Fits Honda Z50 1968-1978, and CT70 1969-1...
From
$2.50
OEM Honda Cable Tie. You need at least one per Handle Bar.
Also used inside the frame on the CT...
From
$6.50
OEM Honda Throttle Assembly / parts: These parts fit the Honda Z50 K0-78, and CT70 K0 models.
O...
From
$19.95
Aftermarket replacement Front and Rear Brake Cables, and Throttle Cable for your Honda Z50 K1-K2....
$29.95
OEM Honda Lever set for the Honda Z50 K0-K2 (1969-71) , and CT70 69-73 and QA50. Levers have a ...
From
$6.95
OEM Honda Z50 Grips. Fits Z50 1968-1971.
Sold as each - specify Left, Right or Pair.
Also fits t...
$5.95
OEM Honda wire clip.
Designed to clip the front brake cable and a throttle cable together.
Will f...
$21.95
Aftermarket Kick Stand - includes new spring.
Fits Honda Z50 1968-78.
$26.95
Don't leave your friends behind - get a set of these Buddy Pegs. Great for picking up Chicks - ...
$89.95
*** select size when ordering***
Complete replacement Foot Peg Mount for your Honda Z50 and CT70....
$64.95
OEM Honda Throttle Kit: This Kit fits the Honda Z50 K0-K2 (1968-71), and the CT70 K0-K1.
Includ...
$19.95
Extended Front Brake Cable - long enough for the tallest bars.
Fits Honda Z50, XR50, and CRF50
From
$3.80
OEM Honda Brake rod - fits Honda Z50 1972-99, XR50 and CRF50.
Available as "rod only", or "rod an...
From
$19.95
Nice Aftermarket Black Rubber Tip Levers set for the Honda Z50 1969-1971 and CT70 1969-1973 an...
$45.95
Make your Honda Mini more adult friendly with these BMX style Bars. These bars are wider and have...
$32.95
OEM Style Z50 Chrome shifter. Aftermarket shifter with OEM Honda Rubber. This is a nice reprodu...
$18.95
Replacement throttle cable for all 20mm through 26mm carbs available in this section when using...
$49.95
Aluminum folding shorty lever - works for cable brake or clutch. Has quick adjust, dust boot, and...
$14.95
OEM Honda Steering Stem Nut and Washer - fits a ton of Honda's - including yours!!
Honda Z50, CT7...
$269.95
K1-K2 (1969-1971) Z50 Handle Bars - reproduction. These handle bars are triple plated chrome and...
From
$19.95
*** Kickstand spring sold separately for $19.95.*** (limited Supply)
Complete OEM Honda foot peg ...
$3.50
OEM Honda brake arm nut - see second photo.
Fits many Honda's : Z50, CT70, XL70, SL70, QA50 and m...
From
$2.50
OEM Honda Footpeg Part (s) for the Honda Z50 K0-K2 model.
Available separately or as a complete k...
$17.95
OEM Honda Chrome bolt and washer kit for the top clamp / forks. Fits Honda Z50 K0-78, and Z50R 79...
$22.95
$29.95
Billet Aluminum 1/4 turn Throttle assembly for 7/8 bars - Red, or Black.
Works with the larger ...
$49.95
Billet 1/4 turn Throttle Assembly is designed to work with the larger carbs (like the ones in o...
$36.95
These Swing out kickstarter Arms are designed to work with any under the motor exhaust system -...
$24.95
CNC 2-wire Kill Switch mounts to any standard size 7/8" handle bars.
Select color when ordering...
$145.95
This is our very own P5/ PMX Billet Bar Clamp, triple clamp, top clamp. Its much stronger than th...
$13.95
OEM Honda Handle Bar Holder Knob. Fits Z50 K0-K2 , Z50K3-78, and CT70 K0 models. Knob and Clips a...
$27.95
This aluminum folding tip shifter is longer than stock and the tip is extended as well . Fits a...
$119.95
NEW - polished version - Replacement top clamp / bar holder for the Z50 K0-K2 (1968-71), and CT70...
$25.95
$29.95
This plastic throttle assembly works well with 90 degree Honda cables (1979-99 Z50, CRf50, 70 etc...
$29.95
This Billet aluminum folding tip shifter is longer than stock and the tip is extended as well. ...
$36.95
This Swing out kickstarter arm is designed to work with any under the motor exhaust system - li...
From
$35.95
Sold as a pair or each Specify when ordering.
OEM Honda Handle Bar Knobs Fits Honda Z50 K0-K2...
$18.95
OEM Honda Steering Stem Nut and Washer In factory Black.
Fits a ton of Honda's - including yours!...
From
$5.95
OEM Honda Handle Bar Knob Clip. SOLD as EACH - you will need to order TWO.
Fits Z50 K0-K2 , Z50K3...
$75.95
OEM Honda footpeg mount. Correct for Honda Z50 1979-99, XR50, CRF50, XR70, CRF70.
Finished in a c...
$19.95
Replacement Manual Clutch Cable for our Manual Clutch Kits.
Cable is Black in color.
TBW0323
$18.95
*** NOT for Stock Carb or thumb throttles***
Replacement throttle cable for the 20mm carburetor t...
$27.95
This CR style throttle is designed to work with the larger carbs like our 20-26mm.
Will NOT work ...
$28.95
$29.95
This aluminum folding tip shifter is 1" longer than stock and the tip is extended as well . Fit...
$284.95
Will fit Honda Z50 1969-1999.
PhatMX BMX Bar Kit - includes Black BMX Bars, PMX Billet Aluminum T...
$55.95
This kit is designed to work with stock bars on the Honda Z50 K0-78, and CT70 K0-K1 models when u...
$49.95
Billet 1/4 Turn Throttle for 7/8 bars - Red, or Black.
Works with the larger big bore kits like ...
$17.95
Very nice reproduction front or rear brake arm for the Z50 1969-71 and QA50.
Short version with S...
From
$79.95
$85.95
Ultimate Billet 1/4 turn Throttles Assembly is designed to work with the larger carbs (like the...
$36.95
This Swing out kickstarter arm is designed to work with any under the motor exhaust system - li...
$37.95
These forged aluminum shifters are lighter and stronger than your stock steel ones. Folding exten...
$37.95
Select color and size BEFORE ordering.
This forged aluminum folding tip shifter is longer than ...
$32.95
Stainless steel spring kit for the Honda Z50 K0-K1.
Fits 1969-1970 Z50 hardtail.
Includes the 4 s...
$29.95
This is a reproduction of the OEM Honda Steering Stem Nut in Grey - perfect for your 100 point re...
$36.95
These Swing out kickstarter arms are designed to work with any under the motor exhaust system -...
$39.95
Molded white rubber grip set. These are exact replicas of the OEM Honda grips that came stock on ...
$36.95
Add that custom look to your Honda Z50 1969-71, and CT70 models. Billet Aluminum Knobs with machi...
$49.95
Injection molded plastic lever set remanufactured to exact detail to the original Honda lever. Pr...
$55.95
Replica chrome handle bar from the old Honda Chally bikes - these are a great comfortable bend fo...
$39.95
Add that custom look to your Honda Z50 K0-K2 (1969-71), and CT70. Billet Aluminum Knobs with mach...
$89.95
Made from aircraft quality 6061 aluminum, these stunt pegs /foot peg are 100% bolt on. They all...
$9.95
Reproduction Steering Stem Nut and Washer - fits a ton of Honda's - including yours!!
Honda Z50, ...
$169.95
Renthal uses extremely tight tolerances and a proprietary alloy, specially developed for the manu...
$4.95
OEM Honda Steering Stem nut.
Fits QA50, XR50, CRF50, XR70, CRF70, and many more.
95020-15100
$139.95
Renthal uses extremely tight tolerances and a proprietary alloy, specially developed for the manu...
Product Types
- Unknown Type
- Clothing
- controls
- electrical
- engine
- Exhaust
- frame
- Gift Card
- suspension