CRF50 Engine
Honda CRF50 engine parts at Canada's largest supplier of Vintage Honda Z50, CT70, ATC70 and Honda CRF50 /70s. Sales, Service, and Restorations. PhatMX
$3.50
OEM Honda Exhaust Gasket - everybody needs one of these.
Works will all the Honda 50cc and 70cc...
$14.95
Oil seal kit for your Honda Mini Motor - Replace all those worn out oil seals - fits all mode...
$13.95
This tool is a must when installing your manual clutch kit, HD clutch kit or even just changing y...
$9.95
K&N Clear fuel filter.
These are a must for any gas tank - helps keep the carb clean and your...
$22.95
Flywheel Puller - A must have if you want to service your Ignition, change your points or stato...
$39.95
This kit includes everything shown for a fraction of the OEM honda parts. If your oil pump gear...
From
$6.95
We have made it easy for you to replace your fuel line on your Honda 50 - we offer two different ...
From
$12.95
Genuine Honda Head Nut and Washer Kit. Replace those nasty looking nuts with nice shiny ones.
Spe...
$6.50
OEM Honda Oil Screen - Clutch cover gaskets also available in this section - change them both at ...
$10.95
You own a Honda.... This is Motor Oil designed for your Honda by Honda. You need this for your ...
$19.95
Aftermarket Kick starter - fits all Z50, XR50, CRF50, XR/CRF70
Perfect replacement for your broke...
$119.95
Heavy Duty Automatic Clutch Kit (3 plate). Great for 88cc or larger displacment engines or simp...
$4.00
Clutch Gasket fits all Honda Z50, CRF50, ATC70 and CT70, CRF70.
From 1968 and up.
Right side cov...
From
$9.95
OEM Honda Heat Spacer for the carburetor to intake (some models are intake to head).
*** Select Y...
$10.95
A must have when installing a new Cam or just to adjust your Valves.
.002 & .003
$7.95
Select the year of your bike when ordering.
OEM Honda Air Filter for the Honda Z50's. Specify yea...
From
$19.95
K&N Style Air Filter - fits all Z50's, CT70 and CRF50s. Not really recommended for dusty cond...
$20.95
Variety of Allen head bolts for use on your engine cases. Also comes with wrench.Replace those st...
From
$1.95
OEM Honda carb drain hose - this is NOT fuel line but the smaller overflow drain line on the stoc...
$8.95
OEM Honda Kickstarter oil seal.
Fits a ton of Honda motorcycles.
91202-KFL-841 , 91202-302-010
$3.50
OEM Honda stator plate screws. Time to replace those stripped out screws. Fits a ton of Honda's i...
From
$3.50
OEM Honda Drain Plug - as a kit with the aluminum washer or just as the bolt.
Specify when order...
From
$25.95
Red Dual Layer Foam Filter - This high quality airfilter is better suited for MX or dirt use. A...
$8.95
Stator seal kit includes the following: 1 - large O-Ring for Stator plate, 2 small O-Rings for st...
$9.95
This very powerful magnetic drain bolt will catch ferrous material, preventing it from re-circula...
$5.95
OEM Honda Flywheel- woodruff key.
Specify Z50/CT70 or XR/CRF50
90741-035-000
$49.95
Highly recommended when using a big bore kit. Requires 2mm drill out of oiling outlet.
Specify Y...
$9.95
Chrome Dips stick - fits all Honda 50's & 70's from 1969 and newer. Just bolt it in for inst...
$3.00
OEM Honda flat head screws for the internal clutch cover - these strip every time you take them o...
$4.95
OEM Honda over flow clamp. Fits a ton of Honda's including ALL Z50, CT70, ATC70, TRX70, XR50, CRF...
$3.25
OEM Honda Exhaust Stud - M6 x 32mm - will fit a ton of Honda motors.
Sold as EACH - you will ne...
From
$3.25
High quality fuel gas line - sold by the foot. This is 4.5mm ID- used on minis such as Z50, CRF50...
$13.95
OEM Honda tappet cover - polished and cleared over - perfect for that show bike, or just replacin...
From
$6.95
OEM Honda Cam Cover - fits most Honda 50cc and 70 cc bikes from 1968 to present.
Z50, CT70, ATC7...
$6.95
Honda flywheel / crank nut and washer - fits all Honda Z50, XR50, CRF50, CT70, XL70, SL70, ATC70,...
$9.95
These Magnetic drain plugs are a no brainer - every motor should have one - plus they look reall...
$45.00
OEM Honda Clutch Plate (s) - does your bike lack the "Get up & GO" feeling? Or is your Kickst...
$29.95
Aluminum Skid plates for your Honda 50 and 70cc motor. Protect that investment and look good ...
$3.50
OEM Honda Drain Plug aluminum washer. Its a good idea to replace this with every oil change.
Fits...
$45.95
50cc Piston Kit - includes: Rings, clips, Piston, and Pin. Specify year when ordering.
Fits Hond...
$109.95
Reproduction 70cc head kit. Includes everything shown, Cam, valves and all internal parts.
Will f...
$8.95
OEM Honda Shifter Shaft oil seal.
Fits a ton of Honda motorcycles.
$2.85
OEM Honda Bolt used to mount the cylinder to the case and the head to the cylinder.
$3.50
OEM Honda rubber bumper for cam chain tensioner rod.
Fit all years, Z50, CT70, ATC70, TRX70, SL70...
$14.95
This jet kit is used on 20mm carb that comes in our 88cc kit.
Generally the Pilot jet helps with ...
$139.95
$169.95
This is a very cool Low-Side exhaust. Made from polished Stainless Steel construction. Its has ...
$179.95
Lightweight aluminum cylinder with steel sleeve - Cast in mounts on cylinder for aftermarket skid...
$2.95
OEM Honda O-Ring rubber for the Dip Stick.
Fits a ton of Honda motorcycles. (all Z50, CT70, ATC70...
$9.50
OEM Honda bearing for the transmission on the Honda 50cc and 70cc motors.
One fits on the main sh...
From
$4.95
OEM Honda Clutch Nut and Lock Washer.
These will fit Honda Z50 1969-99, XR50, CRF50, CT70, ATC70,...
$32.95
Tappet Adjustment Tool for the Honda heads, and most aftermarket heads. This is a must for any ne...
From
$3.95
OEM Honda Bolt and Sealing washer for Cam Chain Roller.
As a kit or "Washer Only".
90481-035-000
...
$5.65
OEM Honda Oil Pump cover gasket.
This gasket is NOT included in our regular 50cc and 70cc gasket ...
$9.95
OEM Honda Dip Stick - don't be a cheapskate - replace your ugly dip stick.
Fits a ton of Honda 50...
$85.95
Reproduction Carb for Z50R 1979 -99. Also fits XR/CRF50. Includes 3 pilot jets.
From
$2.00
OEM Honda Air Box parts that fit the Z50R 1979-99.
Select the part number from the main photo tha...
From
$20.95
OEM Honda lower muffler / exhaust guards.
Outer Guard Fits: Honda Z50 79-99, XR50, CRF50, XR70, C...
$6.95
OEM Honda Head / Cylinder Stud. Fits all year Z50, CT70, ATC70, TRX70, XR50, CRF50 and many more....
$3.85
OEM Honda clutch adjusting O-Ring. This is the little rubber on the outside of the clutch cover.
...
$24.95
Chrome tappet cover set - perfect for that show bike, or just replacing some stock stripped cover...
$22.95
High quality anodized CNC machined billet aluminum oil dipstick. Available in Red OR Black. Fits ...
$14.95
This jet kit is used on 20mm carb that comes in our 88cc kit.
Includes: 82,85,87,90,92,95 - stock...
$4.00
Crank Gasket fits all Honda Z50, CRF50, ATC70 and CT70, CRF70.
From 1968 and up.
Center case g...
$62.95
Billet aluminum temperature dip stick - fits all Honda 50's & 70's from 1969 and newer. Just...
$12.95
OEM Honda bearing for the Crank on the Honda 50cc and 70cc motors.
Sold as each - you will need t...
From
$5.95
OEM Honda Clutch adjuster bolt Kit- these fit from 1968- current bikes
Fits all the Honda Z50's, ...
$3.00
OEM Honda Clutch plate side spring - #6 in the photo - these fit from 1968- current bikes.
Fits a...
$8.95
OEM Honda Clutch adjuster bolt- these fit from 1968- current bikes
Fits all the Honda Z50's, CT70...
$12.95
OEM Honda Clutch Ball retainer - this is the newer style - the older ones were more rounded - the...
Best Sellers
