- Home
- Honda Z50
Honda Z50
Honda Z50 parts at Canada's largest supplier of Vintage Honda Z50, CT70, ATC70 and Honda CRF50 /70s. Sales, Service, and Restorations. PhatMX
$139.95
3/16" thick tig welded 6061 aluminum with billet mounts. Bolt-on protection for your engine and p...
$28.95
Dual layer foam filter used on the 22-26mm Mikuni Carbs.
Has a 42mm opening to fit on your carb. ...
$849.95
Piranha 86cc Pit Bike or ATV motor. Features a big valve E22 Performance head, 4 speed semi-auto ...
$76.95
A must have for anyone with a vintage bike who doesn't ride them that often.
Output: 6 volts @ 1....
$84.95
Kit comes with Piston, Pin, Rings, and Clips.
Fits 88cc kits with Stock head - Z50 1982-87, CT7...
$69.95
(darker red than shown)
These are the best seat covers we could find - don't be fooled by cheaper...
$89.95
Made from aircraft quality 6061 aluminum, these stunt pegs /foot peg are 100% bolt on. They all...
$889.95
This kit is the complete kit to convert your stock motor into a powerful open class 108cc engine ...
$3.00
OEM Honda Clutch Spring - this is the small spring on the main part of the front of the clutch.
E...
$139.95
Genuine Honda Monkey Tank Logos - sold as a PAIR = one left and one right badge. Made famous by t...
$60.95
OEM Honda stator plate for the newer 12 Volt motors ONLY.
Fits the Honda Z50R 1988-99, XR50, CRF5...
$22.95
OEM Honda Spark Plug Cap WITH angle.
Fits 1988-99 Z50R, XR50, CRF50 and many more.
30700-GAR-000
$8.95
If your bike is blowing smoke this is one area to check - replace this seal on your exhaust valve...
$34.95
Chrome Oil Plate Cover. Fits a ton of Honda 50cc and 70cc bikes from 1969 to 1992.
Z50 69-92, C...
$32.95
Reproduction front brake cable for the Honda Z50 1972-1978.
Grey cable has black boot at the bottom.
$34.95
You've never seen an Impact Driver like this . Weighs just 6.3 oz (178g.). Others weigh in at up ...
$29.95
Genuine Honda rear brake arm.
Fits Honda Z50 1972-1978, and CT70's.
Has 13mm opening .
Discontinu...
$209.95
*** Does NOT fit the CRF110 ***
Heavy Duty foot peg kit includes BBR chromoly foot peg mount and...
$27.95
Genuine Honda clutch center guide. This is the bushing under the small gear that drives your clut...
$59.95
Reproduction Muffler Guard Protector "B" for the Honda Z50 1972-1975 softail models.
This guard g...
$9.95
Genuine Honda bolt use to mount the reflectors to the Rear of the Honda Z50R 1988-99 Canadian mod...
$12.95
Replacement air filter wire supports for the Honda Z50 K0-K2 (1968-71 hardtail models) and all QA...
$179.95
Hydraulic rear disc brake kit for 10" or larger wheel- ONLY
Includes everything shown plus a 4 bo...
$27.95
Check year before ordering to make sure it will fit.
Fits the following bikes:
CT70 - 1978-94 , A...
$38.95
OEM Honda Oil Plate Cover. This cover has the SMALL opening on the back for the bearing cam mo...
$189.95
$219.95
**Requires a swing out style Kick Starter to pass the muffler. Sold separately.
This is a very c...
$65.95
These are the best seat covers we could find - don't be fooled by cheaper copies on the web - you...
$9.95
Reproduction Steering Stem Nut and Washer - fits a ton of Honda's - including yours!!
Honda Z50, ...
$309.95
Brand NEW exhaust system for the Honda Z50 1968-1971 models. This is a nice quiet performance exh...
From
$3.50
OEM Honda cam chain tensioner bolt and sealing washer. This is the bolt that many people think is...
$181.95
OEM Honda Charcoal Clutch Cover. Will fit a ton of Honda's including:
Z50 1969-99, XR50, CRF50, ...
$79.95
Intake Kit for use with the 26mm or 28mm carburetor (Mikuni VM26, OKO 26, & 28mm).
The head ...
From
$65.95
Shinko Golden Boy 3.50 x 8" tire - these are a replica of the stock Bridgestone tires.
Sold as e...
$8.95
$9.95
Black Beer Koozie Cooler Neoprene Insulated Beer Can Cooler Beer Sleeve Cover. Cartoon CT70 on on...
$8.95
This part was used on many different Hondas to adjust the tension on the cam chain.
Discontinued ...
$5.95
Here is the ultimate sticker for the Honda CT70 enthusiast.
Sold in a set of 2.
Cartoon replica o...
$19.95
Genuine Honda Stanley reflector with black plastic backing.
Fits a ton of Hondas including:
Z50 ...
$2.75
Genuine Honda felt seal for the brake cam on the Honda Z50 1986-1999, XR50, and CRF50.
45134-165-890
$39.95
Headlight bucket emblem for the Honda Z50 1971 (K2) model. EMBOSSED JUST LIKE THE ORIGINAL, NOT A...
$16.95
Genuine Honda rubber grommet for the back of the headlight bucket for the Z50 K3-78 models.
Disco...
$339.95
88cc Big Bore kit and 20mm Carburetor kit Kit: - Lightweight aluminum cylinder with steel sleeve ...
$84.95
CNC Billet aluminum Street Style pegs with Delrin end sliders.
Uses the factory hardware to mount...
$325.95
Brand NEW exhaust system for the Honda Z50 68-71 models. This is a nice quiet performance muffler...
$33.95
Chrome aluminum tappet cover set - perfect for that show bike, or just replacing some stock strip...
$14.95
These Billet aluminum brake adjustment knob allows you fine tune your brakes (front and rear), fo...
$14.95
Replacement screw in main jets for the Stock Honda carburetor Z50 1976+, XR50, CRF50 Keihin PA ca...
$169.95
Renthal uses extremely tight tolerances and a proprietary alloy, specially developed for the manu...
$149.95
$178.95
Includes Two - 2.75" x 10" Aluminum Rims.
One piece aluminum wheels for the Honda Z50 with the 4 ...
$25.95
Very nice replacement top nut race cone for the Honda Z50 K0-71 models.
Fits ONLY the Hardtail Mo...
$245.95
Race Head – Larger valves (now 25/22mm) and better flow for increased performance. Also has bi...
$339.95
These are the best complete seats we could find - don't be fooled by cheaper copies on the web - ...
$25.95
88cc Piston Ring Kit. Includes 5 rings.
Two different kit:
Kit # 1 = 88cc 69-81, ATC70, TRX70.
K...
$37.95
This is a complete billet anodized head breather kit for your Honda or any other motor that fits ...
$25.95
$29.95
Honda banner / race flags for the shop or man cave. A must have for any Honda enthusiast
Aprox 9...
$8.95
$9.95
Black Beer Koozie Cooler Neoprene Insulated Beer Can Cooler Beer Sleeve Cover. Cartoon 1978 Z50 ...
$178.95
Includes 1 - 2.50 x 10" front, 1 - 3.50 x 10" rear.
*** You have to use the 2.50" if you are usin...
$129.95
Reproduction seat for the 1988-99 Z50 R model.
(new photos coming soon)
Has a fine texture black ...
$36.95
This is an all aluminum kickstand available in 2 different lengths.
*** Select size when ordering...
From
$45.95
OEM Honda foot pegs used on the Z50R models - but will also fit the XR50, CRF50, XR70, and CRF70 ...
$10.95
Super soft donuts for your baby hands :) - sold as one Pair.
Fits all standard grips.
$299.95
Mikuni VM26mm Performance Carb Kit - For use with Race Head on the 108cc + kits. This is, perhap...
$39.95
Aftermarket Shift Shaft - time to replace your bent and worn out shift shaft.
Fits the following ...
$33.95
Add that custom look to your Honda Z50 1972-78 models. Billet Aluminum Knobs with machined and co...
$109.95
Chrome reproduction Ignition Cover and Points Cover. Replace that cracked or broken cover with ...
$69.95
Kit comes with Piston, Pin, Rings, and Clips.
Fits 88cc kits with Stock or Race head - Z50 1969...
$25.95
This is a nice reproduction Ignition Coil for your Honda Z50 1988-1999 and XR/CRF50.
Fits from 19...
$2.95
Genuine Honda Brake adjuster barrel - fit a ton of Honda bikes including:
Z50, CT70, ATC70, CRF50...
$12.95
OEM Honda Clutch Screws and washer/stopper . Includes 4 washers and 4 screws.
These screws are us...
Product Types
- Unknown Type
- Clothing
- controls
- electrical
- engine
- Exhaust
- frame
- Gift Card
- suspension