Midsize
Midsize Dirt bike parts at Canada's largest supplier of XR70,CRF70, KLX110, CRF110, XR80, CRF80, GROM125 . Sales, Service, and Restorations.
From
$5.95
*** Specify when ordering.***
Honda 6V Light Bulbs. - you can not buy these at your local "auto ...
$6.95
$9.95
K&N Clear fuel filter.
These are a must for any gas tank - helps keep the carb clean and your...
$15.95
This tool is a must when installing your manual clutch kit, HD clutch kit or even just changing y...
From
$1.95
OEM Honda carb drain hose - this is NOT fuel line but the smaller overflow drain line on the stoc...
From
$4.25
High quality fuel gas line - sold by the foot. This is 5.5mm ID- used on Midsize bike such as KLX...
$6.95
Here is the ultimate keychain for the Honda CT70 enthusiast - flexible rubber with raised letteri...
$3.50
*** Sold as a PAIR.***
Honda stator plate screws. Time to replace those stripped out screws. Fits...
$4.95
OEM Honda Steering Head Bearing Dust Seal.
This seal goes on the bottom of the steering stem befo...
From
$19.95
These are the perfect lever / levers when you're installing aftermarket bars. Fits all standard 7...
$3.55
OEM Honda Exhaust Stud - M6 x 32mm - will fit a ton of Honda motors.
Sold as EACH - you will ne...
$3.50
$4.50
SELECT your color when ordering - sold by the foot!
High quality, super flexible silicone fuel li...
$8.95
OEM Honda Kickstarter oil seal.
Fits a ton of Honda motorcycles.
91202-KFL-841 , 91202-302-010
$8.95
Stator seal kit includes the following: 1 - large O-Ring for Stator plate, 2 small O-Rings for st...
$4.50
***Select model when ordering ***
OEM Honda Steering Head Bearing Dust Seal washer
This washer go...
$9.95
These Magnetic drain plugs are a no brainer - every motor should have one - plus they look reall...
$4.95
OEM Honda over flow clamp. Fits a ton of Honda's including ALL Z50, CT70, ATC70, TRX70, XR50, CRF...
From
$9.95
These are the perfect lever / levers when you're installing aftermarket bars. Fits all standard 7...
$8.95
OEM Honda Shifter Shaft oil seal.
Fits a ton of Honda motorcycles.
91208-KB4-671
From
$3.50
OEM Honda Drain Plug - as a kit with the aluminum washer or just as the bolt.
Specify when order...
$24.95
SOLD as EACH - Tired of those ball bearings falling all over the place? Here is the answer - O...
$9.95
This very powerful magnetic drain bolt will catch ferrous material, preventing it from re-circula...
$15.95
Universal two-prong 6 volt solid state flasher. Can be used on the Honda CT70, ST90, CT90, XL70 ...
$3.50
OEM Honda Drain Plug aluminum washer. Its a good idea to replace this with every oil change.
Fits...
$5.95
OEM Honda wire clip.
Designed to clip the front brake cable and a throttle cable together.
Will f...
$45.95
Make your Honda Mini more adult friendly with these BMX style Bars. These bars are wider and have...
$6.95
Honda flywheel / crank nut and washer - fits all Honda Z50, XR50, CRF50, CT70, XL70, SL70, ATC70,...
$15.95
Basic and comfortable full size black grips. For use with our full size throttle assemblies.
Fi...
$2.00
OEM Honda in line glass fuse. Available in 7A or 10A.
Specify when ordering.
98200-10700
98200-11000
$16.95
*** NOT Designed for thumb throttle bikes.***
ProTaper Full Diamond 2-D Dual-Density Grips are...
$12.95
$15.95
Here is the ultimate key chain for the HONDA enthusiast.
Double sided patch with Honda logo - all...
$3.95
$5.95
*** Sold in packs of TWO***
Hexagon billet aluminum valve caps - can't go wrong with these.
Avail...
$13.95
OEM Honda tappet cover - machine finish and cleared over.
Fits over 1300 different Honda bikes fr...
$12.95
$16.95
Reproduction Valve adjuster tappet covers. Time to replace those cracked and stripped covers.
Sol...
$25.95
This aluminum folding tip shifter is longer than stock and the tip is extended as well . Fits a...
$4.95
Here is the ultimate sticker for the Honda enthusiast.
Sold in a set of 3 - you get 3 decals for ...
$5.95
OEM Honda Oil Pump cover gasket.
This gasket is NOT included in our regular 50cc and 70cc gasket ...
$19.95
Extended Front Brake Cable for the KLX110 - a must for all taller bars.
ALSO fits the CRF110, T...
$14.95
OEM Honda Clutch adjuster bolt Kit- these fit from 1968- current bikes
Fits all the Honda Z50's, ...
$59.95
Black 7/8' (standard bar size) CRF50 / XR70 / KLX110 Tall Bars. Same bend and size as the Pro T...
$29.95
Universal chain break tool - fits 420-530 chains.
The Honda 50's and 70's use a 420 size chain.
A...
$49.95
Billet 1/4 turn Throttle Assembly is designed to work with the larger carbs (like the ones in o...
$15.95
*** Select color when ordering ***
Basic and comfortable full size soft grips.
For use with our...
$3.00
OEM Honda Clutch plate side spring - #6 in the photo - these fit from 1968- current bikes.
Fits a...
$32.95
Tappet Adjustment Tool for the Honda heads, and most aftermarket heads. This is a must for any ne...
$2.95
OEM Honda O-Ring rubber for the Dip Stick.
Fits a ton of Honda motorcycles. (all Z50, CT70, ATC70...
$29.95
This plastic throttle assembly works well with 90 degree Honda cables (1979-99 Z50, CRf50, 70 etc...
$3.95
OEM Honda clutch adjusting O-Ring. This is the little rubber on the outside of the clutch cover.
...
$109.95
*** WILL NOT fit a stock 50cc or 70cc from 1969-99.***
Reproduction 70cc head kit. Includes every...
$4.95
Here is the ultimate key chain for the Honda enthusiast - flexible rubber with raised lettering.
...
$8.95
$9.95
Black Beer Koozie Cooler Neoprene Insulated Beer Can Cooler Beer Sleeve Cover. Cartoon 1985 ATC70...
$29.95
This Billet aluminum folding tip shifter is longer than stock and the tip is extended as well. ...
$14.95
"New Bike in a Can!"
SC1 High Gloss coating is specifically formulated to protect and beautify mu...
$24.95
Chrome tappet cover set - perfect for that show bike, or just replacing some stock stripped cover...
$16.95
(twist throttle only) ProTaper Pillow Grip utilizes exclusive traction pattern and gel-like, vi...
$14.95
This chain roller is a must when using the longer swingarms like the +3".
Includes: Roller, bolt ...
$6.50
$6.95
This is a must if you do any kind of work on your bike - great for de-greasing parts before you...
$6.95
OEM Honda gearshift drum stopper Spring - this is a common part to break. If you're having troubl...
$4.75
OEM Honda tappet cover O-Ring
Fits over 1300 different Honda bikes from 1969- today.(Z50, CT70, ...
$12.95
OEM Honda Clutch Ball retainer - this is the newer style - the older ones were more rounded - the...
$17.95
*** NOT for Stock Carb or thumb throttles***
Replacement throttle cable for the 20mm carburetor t...
$59.95
Aftermarket Clutch Cover. Will fit a ton of Honda's including:
Z50 1969-99, CT70, XR50, CRF50, ...
$4.25
OEM Honda Brake Pedal Washer. This installs after the brake pedal is on the frame.
Fits Z50 1979-...
$119.95
Genuine Pro Taper SE handlebars - Black 7/8' (standard bar size) for the CRF50 / XR70 / KLX110...
From
$1.95
OEM Honda 13mm piston pin / wrist pin.
Specify for 50cc or 70cc when ordering.
"C" clips also av...
$18.95
Mikuni VM26 pilot jet kit includes 15, 17.5, 20 , 25, 27.5,
Will not work on the Chinese copy ...
$23.95
Mikuni VM26 main jet kit - includes 140, 145, 150, 155, 160, 165,170, 175, 180, and 185.
Will...
$10.95
This Honda bearing is located inside the main clutch cover on the small cover.
Fits a TON of Hond...
From
$55.95
7/8' (standard bar size) CRF50 / XR70 / KLX110 Tall Bars. Same bend and size as the Pro Taper B...
$5.95
Here is the ultimate key chain for the Honda ATC enthusiast - flexible rubber with raised letteri...
$139.95
Super high quality carpet display mat with rubber backed for your prized possession. They measure...
Best Sellers
